|
Post by Vindi (Russell) on Oct 7, 2016 12:53:52 GMT
I've made a few sets of door bars but never really pushed them, hoping to change that over the next few months ... I'm going to make a few sets and get some decent pics, do a group buy and see if I can raise the profile a bit.
If you haven't seen them before, I have designed them from scratch rather than just copying what others have done. They connect to the pillars, across the door gap rather than doing half a job and attaching to the floor. They take a bit more work to attach them but the difference is noticeable, much stiffer than the chassis plates or the door bars that attach to the floor.
Aim is to sell the group buy ones at £175 a set, they should be £200 usually
I'll start a thread for the group buy as soon as I can find the pics of some fitted!
Russell
|
|
|
Door Bars
Jan 12, 2017 22:45:48 GMT
via mobile
Post by Vindi (Russell) on Jan 12, 2017 22:45:48 GMT
Forgot to carry on the thread ... I now have several pairs of door bars done, will sell them for £150 a pair wth all the fittings. Pics to follow
Russell
|
|
|
Post by tropical on Jan 13, 2017 17:13:48 GMT
Interested in seeing some pics and description of fitting procedure.
|
|
|
Post by lowender on Jan 13, 2017 17:24:48 GMT
Interested in these too. Any idea roughly of the weight?
|
|
|
Post by Vindi (Russell) on Apr 17, 2017 18:36:16 GMT
Interested in these too. Any idea roughly of the weight? Missed this at the time ... I've just wrapped a pair for posting ... so a pair of door bars plus fittings and a big piece of carpet (best thing to stop the postie bashing them!) weighs 14.5kg
I've made a few sets of these now, and have done a set that can be used with the Hard Dog M1 type Roll Bar as well ... hopefully will have some pics of how that works in a week or two. Got a couple of standard sets spare if anyone wants them!
Russell.
|
|