|
Post by dadbif on Jul 31, 2020 21:02:04 GMT
Thanks for the offer, but my bolts and the threads in the head are like new. I read wannabes post with interest, but after a while I had to go for a lie down....
|
|
|
Post by dadbif on Jul 31, 2020 21:06:37 GMT
Thanks for the offer Rich, but my head bolts and block threads are like new.
After reading wannabes post I have had to go and have a rest...
On a different topic, decided to change the supercharger oil whilst it’s off the car, I’ve mentioned this before with no response, but, in our hot side installation the charger is 90 degrees out of it’s designed situation and the nose oil level is below the bearings, how about increasing the oil level?
|
|
|
Post by dadbif on Aug 2, 2020 12:40:00 GMT
Just examined the old gasket, there is evidence of burning between all cylinders, measured the gasket thickness, it is .008” thinner between the cylinders than the rest of the gasket . Message to self, don’t buy cheap crap gaskets!
|
|