|
|
Post by zoona on Mar 6, 2022 22:11:45 GMT
Do you have anybody who can give you a fresh pair of eyes, and come over and make you go through everything from the beginning? It's really easy to overlook things when you have been staying at our like a madman. Not really. I think the issue may partly be my settings in Tunerstudio/on the MS2. Going to post them online and see if anyone can see something obvious that I'm missing. Can't refer to my old tune/basemap, as it's on a laptop I've forgotten the password to.😵 Somebody must have a map that would be a start (and different to what you have now). Stick up a post about it along for something.... |
|
|
|
Post by onepaintedman on Mar 6, 2022 23:02:02 GMT
I messaged MSLabs (where I got the MS2 built) earlier today to see if I can get a new base map for my current set-up.
|
|
|
|
Post by dadbif on Mar 7, 2022 7:56:26 GMT
|
|
|
|
Post by onepaintedman on Mar 13, 2022 12:26:10 GMT
Switched coil packs again - spark intermittent. Think both of mine are fubar'd, or potentially the ignitor.
So will try and source another coil pack and ignitor to see if either sorts the problem. I've ordered a nice set of yellow 8mm ignition leads too, to rule out that potential issue.
If none of the above work then I'm out of ideas.
|
|
|
|
Post by onepaintedman on Mar 13, 2022 17:19:15 GMT
 Bloody 'ell - the American aerosol paint stripper I bought is seriously effective. Stripped my cam cover in seconds! |
|
|
|
Post by Zed. on Mar 13, 2022 18:54:23 GMT
Bloody 'ell - the American aerosol paint stripper I bought is seriously effective. Stripped my cam cover in seconds! what make? I've a few things to clean and am looking for recomendations?? Rich. |
|
|
|
Post by onepaintedman on Mar 13, 2022 19:24:32 GMT
Bloody 'ell - the American aerosol paint stripper I bought is seriously effective. Stripped my cam cover in seconds! what make? I've a few things to clean and am looking for recomendations?? Rich. This is the stuff Rich. Forms a light foam on contact.  I would recommend ensuring you stay up-wind and wear thick rubber gauntlets.i got a small spot on bare skin and it's quite burny!!!!! |
|
|
|
Post by onepaintedman on Mar 19, 2022 12:27:05 GMT
Yeaaaaaaaaaaaaaaaaaaaaaaaaaaaaah. It lives!!!!!!!!
Belts were a bit squeaky after standing for so long, but it the engine is running!
Hoo-flippin'-ray.
Let the cleaning and prep for MoT begin! (Better find that box of new brake discs and pads now).
|
|
|
|
Post by zoona on Mar 19, 2022 16:41:34 GMT
Yeaaaaaaaaaaaaaaaaaaaaaaaaaaaaah. It lives!!!!!!!! Belts were a bit squeaky after standing for so long, but it the engine is running! Hoo-flippin'-ray. Let the cleaning and prep for MoT begin! (Better find that box of new brake discs and pads now). So it was just the wrong colour on the cam cover? |
|
|
|
Post by onepaintedman on Mar 19, 2022 17:34:47 GMT
Yeaaaaaaaaaaaaaaaaaaaaaaaaaaaaah. It lives!!!!!!!! Belts were a bit squeaky after standing for so long, but it the engine is running! Hoo-flippin'-ray. Let the cleaning and prep for MoT begin! (Better find that box of new brake discs and pads now). So it was just the wrong colour on the cam cover? 🤣🤣🤣🤣👍 |
|
|
|
Post by atlex on Mar 19, 2022 21:10:57 GMT
awesome drew  bet that's a relief. |
|
|
|
Post by onepaintedman on Mar 19, 2022 22:15:09 GMT
awesome drew bet that's a relief. Certainly is fella. I was starting to think it would never happen! I can't wait to get stuck in again now. There's a long journey ahead. |
|
|
|
Post by zoona on Mar 19, 2022 22:18:21 GMT
awesome drew  bet that's a relief. Certainly is fella. I was starting to think it would never happen! I can't wait to get stuck in again now. There's a long journey ahead So... What was the problem? |
|
|
|
Post by onepaintedman on Mar 19, 2022 22:56:25 GMT
Either coil pack, or leads (replaced both with brand new items).
|
|
|
|
Post by onepaintedman on Mar 20, 2022 13:13:54 GMT
Soooooo. Today it won't start again. Will turn and turn, but won't fire 🤬
|
|
bet that's a relief.
bet that's a relief.
le sigh