|
|
Post by BikeTuna on Dec 4, 2017 11:06:07 GMT
AEM wideband sensor and gauge kit, brand new, bought for a turbo conversion and then bought a turbo car with an AEM already fitted. includes all the fascias and bezels £165.00
MK1/2/2.5 MX5Parts twin exit backbox, stainless, great condition £150.00
MK1/2/2.5 Twin hoop stylebar in chrome £25.00
RaconGauge coolant temp gauge and inline coolant temp sensor, cut 1 inch out of the thermostat to rad hose and put straight in £SOLD
Mk1 VLSD, no propshaft or driveshafts £75.00
Mk2.5 Ashcroft ATB Torsen LSD, no propshaft or driveshafts £SOLD
Mk2/2.5 dashboard, complete with heater controls, vents and heater ducting, glovebox and airbag, ideal for Mk1>2 conversion £20. |
|
|
|
Post by wannabe on Dec 4, 2017 11:49:38 GMT
RaconGauge coolant temp gauge and inline coolant temp sensor, cut 1 inch out of the thermostat to rad hose and put straight in £40
Interested in this!
Do you have pics of it installed? I assume the gauge goes into the dashboard and doesn't just stick out of the rad hose?? lol
|
|
|
|
Post by BikeTuna on Dec 4, 2017 12:02:15 GMT
I don't have any pics here at work but I'll take one when I can. It's a blue LED digital gauge that was mounted in a vent, and then the sensor is in inline pipe in red anodised (but a bit faded) which is the same bore as the thermostat to rad pipe, where it was on mine.
|
|
|
|
Post by wannabe on Dec 4, 2017 14:37:04 GMT
That would be cool, thank you  |
|
Crumpets
Chats A Bit
Insert witty remark here...
Posts: 227 
|
Post by Crumpets on Dec 4, 2017 17:21:03 GMT
PM Sent |
|
|
|
Post by howardb66 on Dec 4, 2017 19:38:40 GMT
PM'd re the Ashcroft diff. |
|
|
|
Post by BikeTuna on Dec 4, 2017 21:48:10 GMT
Thanks Crumpets and Howard, but the post had been pipped, sold pending... Will let you know...
|
|
Crumpets
Chats A Bit
Insert witty remark here...
Posts: 227
|
Post by Crumpets on Dec 4, 2017 22:16:43 GMT
|
|
|
|
Post by BikeTuna on Dec 5, 2017 10:50:53 GMT
MK2 diff and temp sensor now sold, cheers
|
|
