|
Post by fellows on Dec 28, 2017 17:41:55 GMT
Hi all - another question from me I'm afraid...
I've just ordered many OEM bushes. However, some are asymmetric. With these ones, does it matter what way round they are fitted into the wishbones? Or is the difference in them purely to allow them to be pressed in?
Does that even make sense!?
Cheers
|
|
|
Post by Horney on Dec 28, 2017 19:39:00 GMT
It doesn’t make sense. Got any pics of what you mean? I’m pretty sure none of the bushes on a 5 are handed.
|
|
|
Post by fellows on Dec 28, 2017 23:03:15 GMT
Sorry, you're quite right - not very clear. As you can see, the bush below is asymmetric. GetFileAttachment by Jon Fellows, on Flickr Does it therefore have a specific orientation that it must be pressed into the wishbone, or is it a case of whatever way is easiest? For example, does the larger lip always have to be on the outside face of the wishbone?
|
|
|
Post by Horney on Dec 29, 2017 8:05:45 GMT
Ah I see. Not sure I’m afraid. I take it the original bushes don’t give you a clue?
|
|
|
Post by fellows on Dec 30, 2017 9:27:08 GMT
Doubtless they would, but stupidly I didn’t think to take reference pictures of the bushes before pressing them out...
|
|