Aaron
Chats A Bit
Posts: 207
|
Post by Aaron on Jul 21, 2018 11:26:53 GMT
Excellent condition Jackson Racing Intake for a 1.6. Probably on for less than 1000 miles due to not using the 5 so much at the mo due to my Z4 Coupe having my interest currently. Anyway i digress. Long story cut short, going to turbo over the next 12 months, so this is going to be redundant obviously. Makes a lovely sound, whether it increases power or not, no idea, seat of the pants tells me it does, but that’s probably just a placebo from the induction noise. It probably does improve power marginally with other mods alongside but you’ll have to check on a dyno. Pretty sure JR suggest 10-15hp 😬 If anyone has a 1.6 Arc chamber i will take Px or swap depending on condition. I know the Arc will also be redundant come turbo time but I prefer the look of the Arc and also allows me to not have to look at the ugly intake pipework in the meantime and i can crack on with supporting mods like bigger rad etc. Located just outside Norwich. £200 or close offer. Or Px/Swap with an Arc Chamber. P.s if anyone wants to sell their Arc chamber separately, send me a PM. Thanks
|
|
|
Post by wannabe on Jul 21, 2018 12:51:25 GMT
|
|
Aaron
Chats A Bit
Posts: 207
|
Post by Aaron on Jul 21, 2018 13:06:56 GMT
It does indeed, PM replied too
|
|
Aaron
Chats A Bit
Posts: 207
|
Post by Aaron on Jul 22, 2018 8:51:37 GMT
Deposit taken.
|
|
|
Post by Fizbne on Aug 15, 2018 21:45:00 GMT
Bit late to the party, but yes confirmed before and after dyno. This does provide a good increase in peak HP and torque all round! And oh lordy the noise! Thread is on Nutz, but I think me old build thread is dead now
|
|
Aaron
Chats A Bit
Posts: 207
|
Post by Aaron on Aug 15, 2018 21:48:07 GMT
Bit late to the party, but yes confirmed before and after dyno. This does provide a good increase in peak HP and torque all round! And oh lordy the noise! Thread is on Nutz, but I think me old build thread is dead now Can definitely feel the difference now back with the stock intake. Was a great bit of kit to have.
|
|
|
Post by wannabe on Aug 16, 2018 9:25:01 GMT
Bit late to the party, but yes confirmed before and after dyno. This does provide a good increase in peak HP and torque all round! And oh lordy the noise! Thread is on Nutz, but I think me old build thread is dead now
It seems some threads are coming back to life now - I will track it down on there!
Am looking forward to getting it fitted - am just hoping that fixing the current running issues first won't mean having to get the head refurbed and all the associated faff/cost... lol
|
|