|
Post by andreww on Apr 28, 2019 18:46:51 GMT
SOLD, SOLD, SOLD BBS 2-part Split Alloy Rims 16” (VW originals) 6.5J x 16H2, 4 x 100PDC, ET45 Fitted with spigot rings to suit NA/NB MX5 Mazda “Eternal Flame” centre caps (as per NA bonnet badge) Uniroyal Rainsport 3 205/45R16Y with 5-6mm of thread, even wear Sprayed black, minor scratches, no kerb rash No need to roll your arches, they fill the wheel space well especially on lowered MX5/Eunos £180 ono, collection only or arrange your own courier to pick up Located in Corfe Mullen (near Poole, Dorset) BH21 3UX Fitted on my Gleneagles: Fitted on my Eunos Turbo:
|
|
|
Post by wannabe on Apr 28, 2019 22:03:43 GMT
O/T but nice paint job on that last picture - is it paint or a wrap?
|
|
|
Post by andreww on Apr 29, 2019 12:38:41 GMT
It's a wrap! as they say at the end of filming... I'm planning to get it re-done this year (probably...funds willing!) because it's getting a little tatty in places. It has been on the car for about 6 years now so it's done really well. It's 3M matt blue metallic, if you get the best wrap it will last a good amount of time. Not sure what I will go with this time...I feel like a change is due :-)
|
|
|
Post by wannabe on Apr 29, 2019 13:47:12 GMT
It's a wrap! as they say at the end of filming... I'm planning to get it re-done this year (probably...funds willing!) because it's getting a little tatty in places. It has been on the car for about 6 years now so it's done really well. It's 3M matt blue metallic, if you get the best wrap it will last a good amount of time. Not sure what I will go with this time...I feel like a change is due :-) 6 years is good going! Did you wrap it yourself or get a dedicated wrapping place to do it? (Yianni-ised, YO!) I have been mulling options for my appalling paintwork and a wrap seems probably the cheapest option (bar rollering it ) if I could get handy with the wrap material myself...
|
|
|
Post by andreww on Apr 30, 2019 19:42:58 GMT
It was done a year before I bought it by a company called Wrap Cube in New Malden. I've heard it is difficult to DIY it on a whole car.
I'll get a company to do it for me again this year sometime. Of course they will have to de-wrap and de-dent the car before wrapping it again!
|
|