gbuk
Chats A Bit
Posts: 130 
|
Post by gbuk on Oct 16, 2020 16:00:28 GMT
So my below bumper foglight fell out of the housing during my Finmere outing the other week. (NA 1997)
I saw a very rusty bracket before I hastily gaffa taped it back into place and there it stays looking very sad. I see MX5 parts have an aftermarket for £7.26 or an original for £58 
Are there any other options?
|
|
|
|
Post by dickie on Oct 16, 2020 18:17:16 GMT
Hi,
I have fitted an LED rear foglight just off centre to the right on one of the flat parts of the black bumper and cut the rear cover to suit, It passed its Mot with it and it is within the original bumper line.
Its a generic Red square led lamp as fitted to trailer boards.
|
|
|
|
Post by FFS Corders on Oct 16, 2020 22:22:52 GMT
Wire the fog to the driver's side rear light and put a red bulb in
|
|
|
|
Post by Zed. on Oct 16, 2020 22:31:41 GMT
Wire the fog to the driver's side rear light and put a red LED bulb in wot I done.... Rich. |
|
|
|
Post by FFS Corders on Oct 16, 2020 22:42:23 GMT
I cheaped out and ended up with a pink fog when I out an LED in  |
|
|
|
Post by dadbif on Oct 17, 2020 7:29:09 GMT
X2 for the red LED, far neater
|
|
|
|
Post by wannabe on Oct 17, 2020 11:19:02 GMT
When we say 'rear light', I assume we are saying 'reversing light'?
|
|
|
|
Post by FFS Corders on Oct 17, 2020 17:24:50 GMT
Yes, indicator isn't suitable
|
|
|
|
Post by wannabe on Oct 18, 2020 13:57:24 GMT
Yes, indicator isn't suitable  |
|
le sigh