|
Post by nookey on Oct 27, 2020 10:19:40 GMT
Thanks All, Superpro bsuhes ordered - what else is it worth changing at the same time? Ball joints,etc?
|
|
|
Post by Zed. on Oct 27, 2020 11:33:18 GMT
I'd suggest a set of wishbone / camber bolts as these get a bit of abuse and probably overtightened a few times many choices available but I'd buy oem Mazda for the qc (same price as aftermarket?) or the cheaper option of high-tensile Allen bolts & nyloc nuts and forget the fixed eccentric washers Rich.
|
|
jon
Chats A Lot
Posts: 270
|
Post by jon on Oct 27, 2020 11:41:03 GMT
+1 for camber bolts - if it's not been apart for a while you will probably break them taking it all apart...
I'd also probably wire brush down the wishbones etc while it's all apart and give everything a coat of decent paint, much easier to do off the car than on!
|
|
|
Post by wannabe on Oct 27, 2020 12:23:15 GMT
Top mounts?
|
|
|
Post by nookey on Oct 27, 2020 20:02:27 GMT
+1 for camber bolts - if it's not been apart for a while you will probably break them taking it all apart... I'd also probably wire brush down the wishbones etc while it's all apart and give everything a coat of decent paint, much easier to do off the car than on! I've bought a 2nd set of wishbones to refurb so currently having the joy of removing the old bushes..
|
|
|
Post by mrwallace on Oct 28, 2020 9:49:16 GMT
If you replace the upper ball joints don't use IL Motorsport ones, the boots failed within months on mine.
|
|
|
Post by nookey on Oct 28, 2020 9:55:16 GMT
If you replace the upper ball joints don't use IL Motorsport ones, the boots failed within months on mine. Thanks.. that’s really helpful to know
|
|