|
Post by wannabe on May 26, 2023 9:28:29 GMT
Does anyone have a set of working OEM mk1 headlights laying around?
As in just the lamp units themselves??
|
|
|
Post by dickie on May 26, 2023 15:59:22 GMT
|
|
|
Post by wannabe on May 27, 2023 17:12:24 GMT
|
|
|
Post by dickie on May 27, 2023 18:05:13 GMT
I have just had a rummage in the lamp box.
I only have one sealed beam unit with continuity the other has a filament gone. These are the non replaceable bulb type so no use to you unless its a pair.
I did find a pair of 1930s MG chrome Lucas L140 headlamps.
The Wipac 7" H4 lamp units look good and are UK MOT compliant and you can upgrade the Bulbs to give a very good light output www.mx5parts.co.uk/headlamp-crystal-clear-mk1-p-1148.htmlI run high wattage bulbs in mine
I have been running high output bulbs for years without any issues as they do not affect the beam pattern and can compete with gas discharge brightness.
I have then in my mazda and volvo as well as my CBR600 just make sure the wiring is in good order.
|
|
|
Post by boggissimo on May 30, 2023 12:37:55 GMT
Does anyone have a set of working OEM mk1 headlights laying around? As in just the lamp units themselves?? I do, somewhere in the garage. Let me know if you still need some.
I must've got lucky with my ebay halo LED lamps as they've not complained at MOT time.
|
|
|
Post by wannabe on May 31, 2023 9:02:46 GMT
Thank you for the kind efforts, offers and advice, chaps! I didn't realise the Wipac halogen units were so relatively cheap from MX5Parts - 25 quid a side with bulbs/lamps included seems very reasonable, barely more than the sealed unit offerings they have, so I think I might just get them ordered and be done with. At least that way I might be able to see on the way to/from the MOT if it gets dark lol I would get the Wipac posh LED jobs for £400+ but it looks like I may need to pay out about £1.5k for private dental work, thanks to an underfunded NHS with months and months of waiting lists for anything at all, nevermind major work... :/ and the clutch work is not going to be cheap... lol
|
|
|
Post by Zed. on May 31, 2023 16:10:54 GMT
|
|