|
|
Post by Vindi (Russell) on Apr 28, 2016 21:47:49 GMT
Might regret this, but I have a chance to buy something very cool so I'm offering my throttle body setup for sale. Set of Toyota AE111 throttle bodies, complete on the toyota manifold with the sensors, linkages, injectors, wiring, vacuum feeds, trumpets and even some very cool filters. These are the bigger TBS, good for some very nice power. Also have a brand new 3T (Techno Toys Tuning) inlet manifold for 1.8 NB, nice CNC machined piece. Will add some pics in the next few minutes     I'm after £550 for the lot, might split them but only if I know both have buyers. Collection preferred from Hagley, West Mids or I can get them posted at cost Russell |
|
|
|
Post by joeytalent on Apr 29, 2016 6:15:03 GMT
I hate all the stuff you're posting for sale right now!
|
|
|
|
Post by Vindi (Russell) on Apr 29, 2016 6:36:44 GMT
I hate all the stuff you're posting for sale right now! Ha ha, sorry, just trying to get some cash together to buy something and the easiest bit to sell are the nice bits! Russell |
|
|
|
Post by Vindi (Russell) on May 30, 2016 14:00:24 GMT
Still got these, would take £525
Russell
|
|
|
|
Post by Vindi (Russell) on Jul 1, 2016 9:31:11 GMT
Still got these, open to offers / trades, especially if you want any other bits off me. Going to clear out the garage a bit so there will be a few ads from me!
Russell.
|
|
|
|
Post by josho on Aug 5, 2016 9:21:27 GMT
PM'D
|
|
|
|
Post by Vindi (Russell) on Aug 8, 2016 19:50:51 GMT
PM answered, these are still for sale ... had a couple of people asking about the manifold so if someone wants the TBs I could split them Russell |
|
|
|
Post by Vindi (Russell) on Aug 25, 2016 10:30:47 GMT
Still got these ... £500 would take the lot at the moment
Russell
|
|
|
|
Post by Vindi (Russell) on Nov 2, 2016 10:19:00 GMT
Still got these
Russell
|
|
|
|
Post by Horney on Nov 2, 2016 11:11:05 GMT
What size inlets on the TBs?
|
|
|
|
Post by Horney on Nov 2, 2016 11:11:28 GMT
Also pic of the inlet mani?
|
|
|
|
Post by Vindi (Russell) on Nov 2, 2016 13:56:49 GMT
What size inlets on the TBs? Not sure, but these are bigger than the 101 tbs, so meant to be good for the 1.8, maybe a bit big for 1.6 unless work has been done Also pic of the inlet mani? Added in to the first post Russell |
|
|
|
Post by Horney on Nov 2, 2016 14:00:13 GMT
I'm building a 1.8 VVT ITB competition engine to replace my Supercharged setup. Just wondering if these will be as good as a set of Jenvys.
|
|
|
|
Post by Vindi (Russell) on Nov 2, 2016 23:00:03 GMT
Just found out they are 45mm. I can't say how they would compare to Jenveys but I can't see there being much difference. One of the guys in the local club has this setup on his Mk1 1.8 hillclimb car and it runs the same power that Jenvey claim for their setup
Are you sure about going VVT? A Mk1 1.8 engine would make it into more groups as it's from the right Mk of car
Russell
|
|
|
|
Post by Horney on Nov 3, 2016 9:07:25 GMT
That's a good point, just checked the blue book and non VVT might be the way to go. Hummm.
|
|
le sigh