|
|
Post by Horney on Jun 30, 2016 7:12:19 GMT
So I got a pair of OE lips from JapStyle a few months back. One fo rmy VR Ltd and one for me and Roger's Max5 race car. Finally got round to fitting one.  Untitled by Nicholas Horne, on Flickr Really impressed with the quality and ease of fitment. It even came with decent nuts and bolts to mount it up. 10/10. |
|
|
|
Post by Meerkat on Jul 1, 2016 10:23:28 GMT
Definitely want to get me one of these. Really just completes the look of the front of the car.
|
|
|
|
Post by kir1 on Jul 11, 2016 11:40:38 GMT
Only saw this now, thanks for the business and review
|
|
|
|
Post by quinvy on Dec 9, 2016 0:23:39 GMT
I couldn't understand how to fit the two air scoops. When you located them into the holes they were no where near the car and just came off. Also mine has a thin area in the moulding that droops down. Luckily it's underneath so can't really be seen. I was disappointed to be honest. They are much cheaper than the IL Motorsport ones though, so maybe to be expected?
|
|
|
|
Post by jackyboy on Dec 30, 2016 8:19:06 GMT
Want
|
|
|
|
Post by nibnob21 on Dec 31, 2016 10:35:56 GMT
I couldn't understand how to fit the two air scoops. When you located them into the holes they were no where near the car and just came off. Also mine has a thin area in the moulding that droops down. Luckily it's underneath so can't really be seen. I was disappointed to be honest. They are much cheaper than the IL Motorsport ones though, so maybe to be expected? Don't worry I was the same. Initially I was disappointed at the quality. Once fitted I calmed down because it looks great, but I wouldn't agree with the 10/10 review above. I've not used the ducts either. I drilled small holes in the under tray and cable tied the channels to them to hold them in place. But I've left the small upper sections off completely - they don't line up with anything! |
|
|
|
Post by ditchfinder on Jan 19, 2017 11:26:59 GMT
Very tempted by these...I might have to "do a buy" when I get paid.
|
|
|
|
Post by Meerkat on Jan 19, 2017 11:34:37 GMT
I also had trouble with a "droopy" bit in one place. I reckon I can sort it out with a hot air gun though so not too bothered, plus it's not really visible unless you get down on your hands and knees.
I also didn't fit the upper pieces for the air channels - I had the same issue where they don't line up properly. But they're not needed anyway.
I'd still rather have one of these and a couple of small issues than spend twice the money on a more expensive one.
|
|
|
|
Post by quinvy on Feb 2, 2017 11:13:54 GMT
I also had trouble with a "droopy" bit in one place. I reckon I can sort it out with a hot air gun though so not too bothered, plus it's not really visible unless you get down on your hands and knees. I also didn't fit the upper pieces for the air channels - I had the same issue where they don't line up properly. But they're not needed anyway. I'd still rather have one of these and a couple of small issues than spend twice the money on a more expensive one. I'm gonna bite the bullet and pay the extra for an IL Motorsport one. |
|
le sigh