|
|
Post by skuzzle on Jul 6, 2020 13:28:18 GMT
Hi guys,
So now that ive closed down feel free to contact me if you want a reply to anything you ask on here.
I'll do my best to answer it with the minimal amount of sarcasm.
|
|
|
|
Post by wannabe on Jul 6, 2020 14:20:59 GMT
Hi guys, So now that ive closed down feel free to contact me if you want a reply to anything you ask on here. I'll do my best to answer it with the minimal amount of sarcasm. I'm very sorry to hear you've closed  but it's cool that you're going to stay around  I wish you all the best for whatever you get up to next!  |
|
|
|
Post by swordspork on Jul 6, 2020 15:55:39 GMT
Not wanting to take up to much of your time. I was very impressed with your service in the past and while I know Skuzzle Motorsport is officially closed is there a chance you may do Dyno tuning work at other locations in the future?
|
|
|
|
Post by madbean on Jul 9, 2020 7:22:37 GMT
NO real sorry to hear this, it was a great place ran by two great guys. Good to hear you still about for info
|
|
|
|
Post by thruxton on Jul 9, 2020 11:18:40 GMT
Bugger!
I've just been saving up for a load of stuff to be done .... by you!
So.
Will you please tell me who does the geo set up for you on an NC using MeisterR units, or, or, if you will what you use to set them up at?
Thank you.
Regards.
Rich.
|
|
|
|
Post by howardb66 on Jul 24, 2020 20:54:45 GMT
Hi Nick
Hope you’re keeping well. A request for some advice please.
What’s the cure for spongy brakes on a MK2.5? I’ve changed the discs & pads, got braided flexi lines, changed the master cylinder twice, got a brake stopper & changed the fluid twice etc. On the road it’s fine but when I’m pressing on I struggle to slow the car down & have to pump the brakes to slow down. On the first pump I can feel the pedal hit the stop, the ABS doesn’t trigger. Is there a trick to bleeding the brakes & maybe I’m trapping air in the ABS block? What do you think?
Cheers
|
|
|
|
Post by noobie on Jul 25, 2020 20:09:30 GMT
Hi Nick Hope you’re keeping well. A request for some advice please. What’s the cure for spongy brakes on a MK2.5? I’ve changed the discs & pads, got braided flexi lines, changed the master cylinder twice, got a brake stopper & changed the fluid twice etc. On the road it’s fine but when I’m pressing on I struggle to slow the car down & have to pump the brakes to slow down. On the first pump I can feel the pedal hit the stop, the ABS doesn’t trigger. Is there a trick to bleeding the brakes & maybe I’m trapping air in the ABS block? What do you think? Cheers Do you cycle the ABS during bleeding? If not, jumper TBS and GND, foot on brake pedal, key on. That should cycle the ABS and put it in debug mode. Repeat a few times whilst bleeding. |
|
|
|
Post by howardb66 on Jul 26, 2020 14:43:43 GMT
Thanks for that. Thought the ABS might have something to do with it as I couldn’t spot anywhere to bleed the block.
Could you explain again long hand please?
|
|
|
|
Post by noobie on Jul 26, 2020 15:42:23 GMT
|
|
|
|
Post by howardb66 on Jul 27, 2020 14:46:05 GMT
Cheers for that. I’ll give it a go.
|
|
max
New Here
Posts: 1
|
Post by max on Aug 25, 2020 13:44:42 GMT
Hello Nick, i am thinking of buying a car that you did a fair amount of work on...can you give me some advice on it please? Blue Mx5 1.8 you did some engine work on in April 2019. Turbo conversion and more... Thanks |
|
|
|
Post by wannabe on Aug 25, 2020 14:32:15 GMT
Hello Nick, i am thinking of buying a car that you did a fair amount of work on...can you give me some advice on it please? Blue Mx5 1.8 you did some engine work on in April 2019. Turbo conversion and more... Thanks in case it pops up an alert on email |
|
|
|
Post by howardb66 on Aug 6, 2021 7:53:42 GMT
Really pleased that Nick is now at Basset Down.
|
|
|
|
Post by wannabe on Aug 6, 2021 13:14:16 GMT
Really pleased that Nick is now at Basset Down. Nice I recall that they've offered MX5 engines before, so will be good to have Nick there as well Now they just need a rolling road and a BBQ...  |
|
|
|
Post by atlex on Aug 6, 2021 22:00:00 GMT
Nick's there .. with his dyno :-)
|
|
but it's cool that you're going to stay around 
