|
|
Post by Rickster on Dec 5, 2017 9:23:16 GMT
 Cant wait to get them on get the alignment done and see how it looks and feels!!!
|
|
|
|
Post by Rickster on Dec 5, 2017 9:24:37 GMT
anyone got a good fast road alignment setup for Meisters on a mk1
|
|
|
|
Post by BikeTuna on Dec 5, 2017 10:21:32 GMT
What have you just taken off?
|
|
|
|
Post by Rickster on Dec 5, 2017 10:36:27 GMT
its a mk2 suspension with 1 coil off the springs, its in ok condition
|
|
|
|
Post by atlex on Dec 5, 2017 10:37:19 GMT
anyone got a good fast road alignment setup for Meisters on a mk1 See this.  |
|
|
|
Post by Horney on Dec 5, 2017 13:38:56 GMT
You’ll love the difference these make.
|
|
|
|
Post by FFS Corders on Dec 5, 2017 15:24:07 GMT
Even second hand, mine transformed the feel over standard shocks plus apex springs
|
|
|
|
Post by rustywheels on Dec 5, 2017 20:00:31 GMT
They'll make s huge difference. Make sure you check the preload is set correctly, as mine needed adjusting before fitting (rears were out) and it's a common issue. For settings, have a look at Flyin' Miatas website: www.flyinmiata.com/tech/alignment.php |
|
|
|
Post by Rickster on Dec 5, 2017 22:37:17 GMT
These are off a mk2 so I suspect the preload may need adjusting
I've fitted the rears and height looks about right - 31cm
I am assuming I will require a little less preload on a mk1 than mk2??
|
|
|
|
Post by Rickster on Dec 5, 2017 22:39:48 GMT
BTW
The bolts in the picture are the skidnation alignment bolts that Bilbo organised a GB on
nice bit of kit
|
|
pewe
Chats A Bit
Posts: 157 
|
Post by pewe on Dec 6, 2017 11:40:06 GMT
These are off a mk2 so I suspect the preload may need adjusting I've fitted the rears and height looks about right - 31cm I am assuming I will require a little less preload on a mk1 than mk2?? Go ask Jerrick on the MeisterR website - he's always very helpful though may comment on the springs being chopped down. Mine on GT1's with alignment from Wheel Alignment Centre handles like dream - pity about the driver. One of the best feelings ever was getting it in the groove around Combe at the last trackday. It really felt like it was up on tip-toes through the corners - just brilliant!! Cheers, Pewe. |
|
|
|
Post by Rickster on Dec 6, 2017 14:17:58 GMT
These are off a mk2 so I suspect the preload may need adjusting I've fitted the rears and height looks about right - 31cm I am assuming I will require a little less preload on a mk1 than mk2?? Go ask Jerrick on the MeisterR website - he's always very helpful though may comment on the springs being chopped down. Mine on GT1's with alignment from Wheel Alignment Centre handles like dream - pity about the driver. One of the best feelings ever was getting it in the groove around Combe at the last trackday. It really felt like it was up on tip-toes through the corners - just brilliant!! Cheers, Pewe. The chopping was on my old suspension I wouldnt chop adjustables!! cheers |
|
|
|
Post by Rickster on Dec 9, 2017 12:22:04 GMT
Got the meisters on
Very nice, much more comfy on the softish setting than my old units
Can’t wait to try em on track!!!
I am about 20mm lower but not slammed! I encounter many speed bumps
I can see why people love em do much!
|
|
le sigh
Jul 15, 2023 20:03:52 GMT
le sigh
Jul 15, 2023 20:03:52 GMT