|
Post by trikkisixx on Apr 13, 2018 8:43:06 GMT
Morning guys and dolls! I'm after a bit of advice if you will. I pulled my car out the garage last night as I planned to start MOT prep. I need to wire in a rear plate light which is no big deal, however I seem to have an issue. I have front lights, I have brake lights, I have indicators (sort of), I have reverse lights. What I don't have, is my rear driving lights. Also, when on four-way flashing, my indicators are at normal speed but individually, they are super fast. Fuses seem ok. All the bulbs are ok. The couple of things I have done electronically that "may" have affected the lights are, 1. installed LED indicators up front from JASS, they claim they're plug and play. 2. Pulled the ST Sign fuse. 3. Installed an MSPNP2 ECU. Any ideas?
|
|
|
Post by FFS Corders on Apr 13, 2018 9:05:16 GMT
Your LED indicators are causing the hyperflash. Not much of a worry but you can solve it with a resistor
Not sure about your driving lights I'm afraid
|
|
|
Post by trikkisixx on Apr 13, 2018 9:21:30 GMT
I did think that but JASS say they should be a direct PNP replacement. I've emailed them to check anyways.
|
|
|
Post by wannabe on Apr 13, 2018 9:58:11 GMT
Swap some standard bulbs back in and see if it fixes anything!
|
|
|
Post by atlex on Apr 13, 2018 10:03:19 GMT
|
|
|
Post by trikkisixx on Apr 13, 2018 10:15:00 GMT
Man, what a pain in the ring lol wish I'd just bought orange bulbs now... anyone know where I can get em?
|
|
|
Post by Horney on Apr 13, 2018 11:16:01 GMT
Halfords will do orange bulbs. Maplins will do resisitors.
|
|
|
Post by trikkisixx on Apr 13, 2018 11:25:24 GMT
Halfords do orange bulbs but not to fit the front of the Mazda, the prongs (or whatever) are at the wrong angles. I'll check Maplins for the resistors though, cheers boss man!
|
|
|
Post by stewie on Apr 17, 2018 20:26:19 GMT
I have just installed quad led rear lights/panel with resitors for hyperflash. All good now. Any qs just ask.
|
|
|
Post by wannabe on Apr 17, 2018 22:57:53 GMT
I have just installed quad led rear lights/panel with resitors for hyperflash. All good now. Any qs just ask. Pics of finished installation don't seem to be working for me?
|
|
|
Post by stewie on Apr 18, 2018 10:06:15 GMT
Pics on the way later...
|
|
|
Post by trikkisixx on Apr 18, 2018 10:49:22 GMT
Ah cool, I'd like to do the GV rear panel in the future. For now though, I've bought some orange bulbs off ebay which should solve it. Wierdly, the rear lights have come back after a short drive, must have a loose connection somewhere...
|
|
|
Post by wannabe on Apr 18, 2018 13:44:02 GMT
I call that 'character' lol
|
|
|
Post by atlex on Apr 18, 2018 14:22:57 GMT
I've got a spare flasher module I can do the 1Mohm resistor job on. Can offer that as exchange for a 10er and postage :-)
|
|
|
Post by stewie on Apr 19, 2018 20:09:57 GMT
I have just installed quad led rear lights/panel with resitors for hyperflash. All good now. Any qs just ask. Pics of finished installation don't seem to be working for me?
|
|