|
Post by BikeTuna on May 6, 2016 18:22:52 GMT
It's not on an mx5, it's my other project but you guys know what you are on about so...
I'm getting oil out of the exhaust. The oil feed to the turbo is coming from a filter sandwich plate, and to check the return is good enough I've even ran the engine with the return disconnected and the oil dripping out of the turbo into a pot, but I'm still getting oil from the exhaust.
Any ideas? Is the oil feed to strong it's breaching the seals or is my turbo knackered?
Ta
|
|
|
Post by BikeTuna on May 7, 2016 19:47:57 GMT
I may have worked this out...
Is the bolt that retains the oil feed pipe to the top of the turbo oil galley a flow restrictor bolt or a regular bolt?
|
|
|
Post by atlex on May 7, 2016 20:39:17 GMT
it probably is a restrictor bolt. ^^
|
|