Tom
Chats A Bit
Posts: 218 
|
Post by Tom on Apr 23, 2016 18:54:07 GMT
Hacked the prarrie canoe out of my rear bumper. Need to take it off tomorrow though to get the remainder of the support off!
|
|
|
|
Post by boringgit on Apr 24, 2016 14:35:46 GMT
Changed my coolant. Yesterday, wired up a power supply for my camera. Pro Job innit.  |
|
|
|
Post by atlex on Apr 24, 2016 17:32:40 GMT
Fitted my itg sausage fitter and T3 backing plate. both of which took a little modification with a drill and a dremel .. and a craft knife... and brute force.  also found what might be an oil leak in my cam cover gasket. it never ends. |
|
|
|
Post by Dweenimus on Apr 24, 2016 19:44:09 GMT
I drove it to an ANPR enforced car park. Apparently it couldn't recognise an offset plate! So yeah, it asks what time I arrived... So i said half an hour ago, not 5 hours ago. Woop!  |
|
|
|
Post by zoona on Apr 24, 2016 20:06:40 GMT
I drove it to an ANPR enforced car park. Apparently it couldn't recognise an offset plate! So yeah, it asks what time I arrived... So i said half an hour ago, not 5 hours ago. Woop! Aha. We have one of them near us. If you reverse park in a certain spot is sees you come in, but then thinks you immediately left the car park. So does the same thing. Quite handy. But i live in the rear canoe end of nowhere, so I have never been charged more than 50p there. So I usually tell the truth... |
|
|
|
Post by Horney on Apr 24, 2016 20:11:19 GMT
Won a Canoeing trophy!!!!!!!
|
|
|
|
Post by randomfactor on Apr 24, 2016 22:37:14 GMT
Drilled some more holes, made some holes bigger, painted some things and splashed on some underseal. Finally ready to reassemble  |
|
|
|
Post by FFS Corders on Apr 25, 2016 12:25:33 GMT
spending the day recovering from japfest weekend
and will get round to changing back to my daily wheels so the rears will stop scraping on the arches all the time
|
|
|
|
Post by Dweenimus on Apr 25, 2016 12:44:48 GMT
|
|
|
|
Post by mplsblack on Apr 25, 2016 18:05:30 GMT
Booked a dyno session with the guys down at Skuzzle  Although Nicks ultimate engine guide tells me that I have banana rod potential  Never mind, it will be good to get it done, Mark did give me the solution to the problem although more beer tokens need to be saved |
|
|
|
Post by atlex on Apr 25, 2016 19:15:00 GMT
thar be an air leak in one of my precious wheels too. 26 to 8 psi in 4 weeks.
|
|
|
|
Post by rich5660 on Apr 25, 2016 19:34:02 GMT
Booked a dyno session with the guys down at Skuzzle Although Nicks ultimate engine guide tells me that I have banana rod potential Never mind, it will be good to get it done, Mark did give me the solution to the problem although more beer tokens need to be saved They were unfortunately spot on with my banana rods, not that you would have noticed without taking the engine out |
|
|
|
Post by Dweenimus on Apr 26, 2016 14:42:06 GMT
TODAY I DID THIS  Well not today, a week or so ago. There's £65 down the drain. Stupid unclear roadsigns! On the plus side, i have my roof down in the pictures |
|
|
|
Post by atlex on Apr 26, 2016 14:54:49 GMT
I've been done in kingston too. I don't drive there by choice now Canoe that prarrie canoehole. |
|
|
|
Post by Dweenimus on Apr 26, 2016 15:48:45 GMT
Worst thing is. I think I did the same thing yesterday :/
EDIT: WOO! I checked my dash cam and didn't do it again yesterday. thank Canoe for that.
|
|
Although Nicks ultimate engine guide tells me that I have banana rod potential 
Never mind, it will be good to get it done, Mark did give me the solution to the problem although more beer tokens need to be saved 
le sigh
Jul 15, 2023 20:03:52 GMT
le sigh
Jul 15, 2023 20:03:52 GMT