|
|
Post by Ptichka on Jun 8, 2016 12:35:56 GMT
Nice. how wide are those ? TOO DAMN WIDE. lol. Only 8" wide  |
|
|
|
Post by wannabe on Jun 8, 2016 15:30:09 GMT
Is that drivers' side rear on back to front?
|
|
|
|
Post by Ptichka on Jun 8, 2016 18:58:07 GMT
Is that drivers' side rear on back to front? I was waiting for someone to point that out! I just chucked the first two wheels I cleaned on to fit check them, waiting for two new tyres then they'll go on properly. |
|
titch
Chats A Bit
Posts: 149 
|
Post by titch on Jun 8, 2016 21:47:25 GMT
Drove it round Cadwell.
|
|
|
|
Post by mplsblack on Jun 10, 2016 9:13:50 GMT
I've filled mine with camping stuff, steak and beer and I'm heading off to Blyton for the OC track weekend. Looking forward to meeting any other Mighty 5s who are going  |
|
|
|
Post by FFS Corders on Jun 10, 2016 9:39:45 GMT
i'll see you there! which sessions are you doing? i've got saturday afternoon OPL and Sunday morning OPL
|
|
|
|
Post by mplsblack on Jun 10, 2016 10:15:18 GMT
Saturday all day, my pass doesn't extend to Sunday this year  see you Saturday. |
|
|
|
Post by Dweenimus on Jun 10, 2016 12:36:07 GMT
Fixed my annoying/scary clunking.
Prop shaft UJ was Canoeed!
Swapped out in less than an hour, and all good now.
Might do a "how to" but tbh, it's 4 bolts lol
|
|
|
|
Post by Ptichka on Jun 10, 2016 14:51:07 GMT
Finished retrimming my door cards, passenger side done, just waiting for the glue to dry on the drivers side, pretty happy with them.  |
|
|
|
Post by Dweenimus on Jun 10, 2016 17:53:53 GMT
Tried to remove my wooden nardi wheel and swap over to the spare momo(+boss), so I can refurb it.
Would. Not. Move. Like Canoe. Scared I'd break the wheel!
|
|
|
|
Post by atlex on Jun 10, 2016 18:09:02 GMT
unscrews, surely, dween ? bit of wd/plusgas...
|
|
|
|
Post by atlex on Jun 10, 2016 18:09:19 GMT
( hope nobody glued it in place lol )
|
|
|
|
Post by Dweenimus on Jun 10, 2016 20:23:39 GMT
unscrews, surely, dween ? bit of wd/plusgas... Managed to undo the bolt. But the wheel would just not budge. Need to take both wheel and boss off to swap to the momo. None of the allen key bolts wanted to budge either |
|
|
|
Post by FFS Corders on Jun 10, 2016 23:33:42 GMT
Lots of penetrating fluid required
Giggity
|
|
|
|
Post by atlex on Jun 10, 2016 23:40:00 GMT
moar penetrating fluid / gun oil.
maybe some heat too if *someone* decided to use a cyanoacrylate (super) glue (it happens, don't judge)
those bolts should be fairly high-tensile steel so they should deal well with being given a good shock. i.e. tap of a mallet on an allen key.
|
|
le sigh
Jul 15, 2023 20:03:52 GMT